Artison Sound Surface 40 Manuel d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Artison Sound Surface 40. Artison Sound Surface 40 11 pages. Invisible speaker

Imprimer la page

3. Slide speaker down wall until the speaker face

aligns with cut out hole opening. Pull speaker

outward so the speaker face rests into the cut

out.

4. Insert the (6) speaker mounting screws to secure

the speaker to the wall or ceiling. See Figure 11.

IMPORTANT!

– When installing screws, tighten all screws in small

increments until the speakers front face is inset

in (1.5 mm) from the wall board face.

– Using a #2 screwdriver, tighten screws until they

are slightly recessed and create a small dimple

without breaking the paper. Using a screw gun to

tighten screws is NOT recommended.

5. Ensure the speaker is not recessed into the wall

too deeply as sound performance will be affected.

The maximum depth between the speaker face

and the front of the drywall is

1.5 mm or

inch. See Figure 12.

6. Remove the installation handle and set aside.

Turn the audio source one last time to test that

the speakers work. DO NOT mud the speaker into

the wall without testing.

NOTE: Without the drywall compound covering the speaker,

it will sound 'bright'. The application of the joint com-

pound will dampen the sounding board of the speaker.

Surface 40/80 Speakers | 009-1656-01 | 180731

Installation

7 of 11

Figure 11.

Figure 12.

45 Perseverance Way, Hyannis, MA 02601

Savant.com

Speaker Face

Max Inset

/ inch

Wall Board

Surface

| 508.683.2500