1 Source S1-TBEU22P7S Manuel d'instructions d'installation - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} 1 Source S1-TBEU22P7S. 1 Source S1-TBEU22P7S 17 pages. Heat/cool & heat pump 7-day programmable digital thermostat

Imprimer la page

INSTALLATION INSTRUCTIONS

Test Operation

On the thermostat, press the Mode button

until COOL is displayed. Press the

COOLER or WARMER button until the set

temperature is 10 degrees below room

temperature. The HVAC unit should

energize in the cooling mode

Owner's Manual)

Note: You may need to wait up to five minutes

for cooling to energize due to the compressor

lockout feature.

TWO STAGE OPERATION - The 2nd stage

of cooling is turned on when the room

temperature is equal to or greater than:

the setpoint plus the 1st stage deadband

(one degree, adjustable), plus the 2nd

stage deadband (two degrees, non-

adjustable).

Heating

Deadband

db 2

(non-adj. 2 )

2nd Stage

1st Stage

turn on

On the thermostat, press the Mode button until

OFF is displayed. Press the Fan button until

Fan On is displayed. The fan should turn on

and run continuously.

Cooling

Deadband

db 1

db 2

(adj. 1-6 )

(non-adj. 2 )

Heat or Cool

1st Stage

Setpoint

turn on

Page 15

S1-TBEU22P7S

(page 7 of the

2nd Stage

turn on