Artiste E1 Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Artiste E1. Artiste E1 10 pages. 2.4ghz wireless induction neck-loop headphone
The following table shows the settings. Try out which setting works best for you.
■
Troubleshooting
No sound
Ensure that the mains adapter is pushed fully into the power outlet and that its cable is properly
-
connected to the DC IN connector on the Transmitter.
Ensure that the Receiver power ON/OFF switch is switched to ON.
-
The charge level of the battery inside Receiver may be too low. Recharge the battery or replace
-
it with a fully charged battery.
Ensure that the TV set, Hi-Fi system or audio component is switched ON and set to a channel
-
that broadcasts an audio signal.
Use the Volume Control on the Receiver to increase the sound level.
-
The connected audio/video equipment may not be in playback mode.
-
Start playback on by the equipment.
The Receiver output level is set too low. Adjust the volume to a suitable level.
-