Artistic Licence Rail-Split RJ45 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Artistic Licence Rail-Split RJ45. Artistic Licence Rail-Split RJ45 8 pages. Version 1-0
Imprimer la page
Overview
Rail-Split RJ45 is a fully bi-directional DMX512 splitter and distribution amplifier, with the added
feature of a 'data fixer' for DMX. The latter functionality is used for resolving flickering problems
arising from product incompatibility issues - see 'Fixer Mode' on page 6 for more information.
Key features
Input Optical Isolation
y
Four independent outputs
y
Bi-directional outputs
y
Electrocution protection: Input, Loop and
y
all outputs protected against continuous
connection to 425 VAC (self-healing)
RDM (Remote Device Management
y
Draft & Standard V1.0)
DMX512-A compatible
y
Microprocessor controlled
y
Surface mount or DIN rail mounted
y
DMX-Fix mode to handle compatibility
y
issues
Mains powered
y
RJ45 data connectors
y
DMX512 Wiring
RJ45 Pin
7 & 8
2
1
Rail-Split RJ45 User Guide
Connections
Input
The DMX512 input is via the RJ45 connector.
Loop-Through
A passive loop-through connection allows
onward connection to other DMX512 devices.
If this feature is not required then the signal
must be terminated. The product contains an
internal termination link. This is enabled by
fitting the shorting plug of the jumper (see
Connection 5 on the previous page) over the
lower pin.
Alternatively, a plug-in RJ45 terminator can
be fitted to Connection 4 (not supplied).
Output
Four DMX512 outputs are provided. Each
output is capable of driving 32 additional
DMX512 devices. It is not necessary to
terminate any outputs that are not connected.
However, a terminator must be connected to
the final DMX512 device.
XLR Pin
1
2
3
Function
Ground
Data -
Data +
Colour
Black
Blue
Red
Page 4