Artistic Licence moody cvz1 Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Artistic Licence moody cvz1. Artistic Licence moody cvz1 4 pages.

Imprimer la page

Overview

y moody cvz1

- Controls a single RGB fixture with CV dimmer output at 12 - 24V

- Output is RGB common anode

- Wheel controls fixture colour

Operation (moody cvz1)

From factory, all scene channels are programmed to cyan. At power on, moody will automatically

fade the master level to full over 5 seconds.

If lights are on, briefly press the control: moody fades the master level to zero over 5 seconds.

If lights are off, briefly press the control: moody fades the master level to full over 5 seconds.

Rotate control clockwise or counter-clockwise to change the colour of the fixture. The LED

indictor shows the master level (always 100%) and colour of the fixture.

To set a scene: please see programming instructions below.

Programming (moody cvz1)

Step 1

To enter programming mode, press and hold control for 3 seconds.

Step 2 - programme the colour (hue)

moody's indicator LED flashes

colour programming mode, then shows the colour of the fixture.

Wait 5 seconds; moody will start slowly cycling through the colour

palette. When you see the colour you want, briefly press the

control.

Alternatively, rotate the control clockwise or counter-clockwise to

move forwards or backwards through the colour palette. When

you see the colour you want, briefly press the control.

N.B. During the programming process, the fixture will change

colour to show the effect of your programming.

red

to acknowledge it has entered