Altusen KM0030 Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Altusen KM0030. Altusen KM0030 2 pages. Console 32-port matrix kvm switch

Imprimer la page

5-4

Cascading

Cascaded KM0532 / KM0932 Installation Diagram

KA7230/KA7240

Console Module

KM0932

KA7230/KA7240

Console Module

KM0932

5-5

Daisy Chaining

Up to 7 KM0032 Expansion KVM Switches can be daisy chained from the first level KM0532 /

KM0932.

The KM0932 is capable of supporting nine independent KVM consoles, while the KM0532 is

capable of supporting 5 independent KVM consoles. In a complete daisy chained installation, the

KVM consoles that belong to the KM0532 / KM0932 can access and control all of the computers

on the installation.

To set up a daisy chained installation, refer to the diagram and do the following:

1. Use a daisy chain cable set to connect the CHAIN OUT port of the parent KM0532 / KM0932

to the CHAIN IN port of the first KM0032.

Note: 1. The maximum distance between any two switches cannot exceed 10 m.

2. The maximum distance between the KM0532 / KM0932 and the last KM0032 in the

chain cannot exceed 50 m.

2. Follow the instructions given for single level installation to connect computers, LAN, power

cords, etc.

3. For any other KM0032 switches you want to add to the chain, use a daisy chain to connect the

Chain Out port of the parent switch to the Chain In port of the child switch.

4. Power on the installation according to the following procedure:

a) Power on the first level (KM0532 or KM0932) switch.

b) Power on each switch in the chain in turn (second station, then third station, etc.). In each

case, wait for the station position to be ascertained and displayed on the Station ID LED

before powering on the next station. (The Station ID for the first KM0032 is 01, the Station

ID for the second level KM0032 is 02, etc.)

c) After all the KVM switches are powered on, power on the computers.

Daisy chained Installation Diagram

KM0932

KM0032

Administrator Setup

First Time Setup

Once the KM0032 / KM0532 / KM0932 installation has been cabled up, the Super Administrator

needs to set the system up for user operation. The most convenient way to do this for the first

time is from one of the consoles.

Note: For remote methods of setting up the network, see IP Address Determination. After the

console has been connected up, and the KM0032 / KM0532 / KM0932 turned on, a login

prompt appears on the console monitor:

After the console has been connected up, and the KM0032 / KM0532 / KM0932 turned on, a

Since this is the first time you are logging in, key in the default Username: ADMINISTRATOR;

and the default Password: password.

Note: For security purposes, you should change the password (Port Access

Preferences). The

default Administrator user name can not be changed.

After you successfully log in, the Console's GUI appears:

First select the User Management tab, then click Add at the bottom of the main panel.

Network Configuration

To set up the network, do the following:

1. Click the Device Management tab.

2. Select Network on the menu bar. A screen similar to the one below appears:

• For dynamic IP address assignment, select Obtain an IP address automatically.

• To specify a fixed IP address, select Set IP address manually, and fill in the IP address.

• For automatic DNS Server address assignment, select Obtain DNS Server address automatically.

• To specify the DNS Server address manually, select Use the following DNS Server, and fill in

the addresses for the Primary and Alternate DNS servers.

Logging In

The KM0532 / KM0932 switch can be accessed from a local console or an internet browser.

Browser access is provided for convenience in performing administrative tasks from a remote

location. Port switching and port operation procedures can only be performed from a console

Console Login

When a console is connected to a powered on KM0532 / KM0932 and there is no user logged in,

the KM0532 / KM0932 login screen appears on the display

Simply key in your Username and Password, then click Login to bring up the Console GUI.

Browser Login

The KM0032 / KM0532 / KM0932 can be accessed via an Internet browser from any platform

Note: This can be used for remote configuration purposes. Port access can only be performed

from a Console login.

To access the switch, do the following:

1. Open the browser and specify the IP address of the switch you want to access in the browser's

location bar.

2. When a Security Alert dialog box appears, accept the certificate – it can be trusted. If other alerts

appear, accept them as well. Once you accept the certificate(s), the login page appears.

3. Provide your username and password (set by the administrator), then click Login to bring up the

Browser UI Main Page.

Operation

After you have successful logged in into the Matrix KVM Switch, you can access the server

connected to a port by doing the following:

1. Double clicking on the port's icon in the Sidebar tree.

2. Selecting the port in the Sidebar tree and clicking Connect in the main panel.

Port Operation

The UI provides a toolbar to help you control the KM0032 / KM0532 / KM0932 from within the

captured port. To bring up the toolbar, tap the Toolbar Hotkey (Scroll Lock), twice. The toolbar

appears at the upper left corner of the screen.

• Information about the functions that the Toolbar items perform appears when you move the

mouse over them.

• When the toolbar displays, mouse input is confined to the toolbar area and keyboard input has no

effect on the computer connected to the port. To carry out operations on the computer, close the

toolbar by clicking the X on it; or, recall the UI and select the port again.

Specifications

Function

KM0032

KM0532

KM0932

Computer

Direct

Connections

Max

8,000

Console Connections

Port Selection

Via Daisy Chain

OSD, Hotkeys

Console Port

5 x RJ-45 Female 9 x RJ-45 Female

KVM Port

32 x RJ-45 Female

1 x HPDB-50

Daisy chain

1 x VHDCI 68 Female (Black)

Female (Black)

Connectors

LAN

1 x RJ-45 Female

PON

1 x RJ-45 Female (Black)

Power

1 x 3-prong AC Socket

Reset

1 x Semi-recessed Pushbutton

Switches

Power

1 x Rocker

F/W Upgrade

1 x Slide

Console Port (On Line)

5 (Green)

9 (Green)

KVM Port (On Line /

LEDs

32 Dual-colored (Green / Red)

Selected)

Power

1 (Blue)

I/P Rating

100–240V AC, 50/60 Hz; 1A

Power Consumption

120V/50W;

120V/45W;

120V/50W;

240V/51W

240V/46W

240V/51W

Emulation

Keyboard/Mouse

PS/2; USB; Serial

Scan Interval

1–240 Seconds

Video

1280x1024@60Hz max. 300m; DDC2B

Operating Temp.

0–50˚C

Environment

Storage Temp.

-20–60˚C

Humidity

0–80% RH, Non-condensing

Housing

Metal

Physical Properties

Weight

6.06 kg

6.07 kg

6.08 kg

Dimensions (L x W x H)

43.36 x 41.09 x 4.40 cm