Altusen SN3101 Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Altusen SN3101. Altusen SN3101 2 pages. Serial device server
Imprimer la page6
Hardware Installation
To install the SN3101, do the following:
1. If you intend to use the DC terminal, screw the DC terminal connector to the block – as
shown in the following diagram
Refer to the Installation diagram as you do the following:
a. Use a null modem cable to connect the SN3101's serial port to your serial device.
b. Ground the device.
c. Plug the cable that connects the SN3101 to the network or the Internet into the LAN port.
d. Connect the DC power source to the device.
SN3101 Installation Diagram:
Serial Device
SN3101
b
a
or
c
d
12 – 48V
7
Operation
Logging In
SN3101 operation is Internet browser based. To begin:
1. Open your browser and specify the IP address of the SN3101 you want to access in the
browser's URL location bar.
Note: If you are logging in for the first time, use SN3101's default IP address:
192.168.0.10.
2. A Security Alert dialog box appears. Accept the certificate.
3. A login dialog box, like the one below, appears:
4. Provide a valid Username and Password (set up by the administrator), then Click Login to
continue.
Note: If you are the administrator, and are logging in for the first time, use the default
Username: administrator; and the default Password: password. For security
purposes, we strongly recommend you change these and give yourself a unique
Username and Password.
After you have successfully logged in, the Main Screen appears:
d
8
Specifications
Function
Specification
Serial
1 x DB-9 M (Black)
Network
1 x RJ-45 (Black)
Connectors
PWR1
1 x 2-pin Terminal Block (Green)
Power
PWR2
1 x DC Jack (Black)
Switches
Reset
1 x Semi-recessed Pushbutton
Power
1 x Green
Link
1 x Green
LEDs
10/100 Mbps
1 x Orange/Green
TxRx (ACT)
1 x Green
PWR1
12-48V DC (2-pin Terminal Block)
PWR2
9-30V DC (Power Adapter Jack)
Power Input
Power Adapter
100-240V AC; 50–60 Hz
4KV burst (EFT), EN61000-4-4 2KV surge,
Power Line Protection
EN61000-4-4
Power Consumption
9V, 2.7W
Standards
RS-232/422/485; Software selectable
Baud Rate
460Kbps
RS-232 Signals
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Signals
Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-, GND
RS-485 Signals
Data+, Data-, GND
Serial
Serial Protection
15 KV ESD Protection for the serial port
Parity
None, Even, Odd, Mark, Space
Interfaces
Data Bits
5, 6, 7, 8
Stop Bits
1,1,5,2
Flow Control
None, XON/XOFF, RTS/CTS
Standards
10/100BaseTX; Autosensing
Protection
1.5 KV Magnetic Isolation
Network
ARP, DHCP, DNS, HTTP, HTTPS, ICMP, IP, TCP,
Protocols
UDP, NTP, PPP, RADIUS, Telnet, SNMP, SNMP
Trap, SMTP, SSH
Regulatory Approval
FCC Class A, CE Class A, RoHS
Operating Temp.
0-60
C
º
Environment
Storage Temp.
-20-85
C
º
Humidity
0-95% RH , Non-condensing
Housing
Metal
Physical
Weight
0.22 kg
Properties
Dimensions (L x W x H)
10.69 x 7.90 x 2.44 cm