Customidea GeoPic II Manuel d'instruction - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Customidea GeoPic II. Customidea GeoPic II 20 pages. Geotagging device for nikon d200/d2hs/d2x/d2xs fuji s5 pro

Imprimer la page

GeoPic II user settings

The GeoPic II has a total of eight user settings, each

with different options that can be configured to suit your

needs. The settings menu is accessed from any mode

by holding the shutter release button half way and

pressing the function button on the GeoPic II for around

5 seconds. As the settings menu is entered, the status

light flashes white twice.

Navigating the setting and option menus is achieved by

using the function button and the shutter release button:

Half press

shutter

release

Function

button

Full press

shutter

release

Status

light

The eight settings and options for these settings are as

follows (default option is green):

Nikon D200, D2HS, D2X and D2XS and Fuji S5 Pro are registered

When in settings menu:

Changes to the next setting

(wraps around from the last

to the first setting)

Enters the option menu for

the current setting. This is

confirmed by a single

red/green flash

corresponding to the first

option for this setting.

Exits the settings menu and

returns to normal operation.

This is confirmed by two

white flashes.

A number of blue flashes

corresponding to the setting

number.

trademarks or a trademark of their respective companies.

When in options menu:

Changes to the next option

(wraps around from the last to

the first option)

Saves the current option to

memory. This is confirmed by

a beep and a number of

green flashes corresponding

to the option number.

Exits the option menu and

returns to the settings menu.

This is confirmed by a number

of blue flashes corresponding

to the setting number.

A number of flashes

corresponding to the option

number. Flash colour will be

green if option is currently in

use or red otherwise.