aluexbeams ALUEX10+ Mode d'emploi
Parcourez en ligne ou téléchargez le pdf Mode d'emploi pour {nom_de_la_catégorie} aluexbeams ALUEX10+. aluexbeams ALUEX10+ 4 pages.
Imprimer la pageInstructions for use
Application area
The ALUEX5 lift spreader is designed to help with lifting objects. The purpose of the lift spreader is to spread the
lifting straps away from the object. The lift spreader is adjustable, enabling lifting to be made as safe as possible. Read
and follow the instructions for use so that the lift spreader is used without risk. Give a copy of these instructions for
use to all ALUEX users.
The lift spreader must not be used for any lifting for which it is not designed.
The maximum permitted lifting angle for the lift spreader is max 30°
Undue strain must not be placed on the lift spreader
Always check that the arms of the lift spreader can move freely
The maximum lifting weight is 5 000 kg with 30° angle.
WLL 5 ton
Figure 1:
The lifting straps must be of the same length.
The maximum lifting angle for the lift spreader is 30°.
The packaging contains these items
•
Frame section
•
4 x end brackets
•
4 x guide pins
•
4 x links for lifting with chains
Figure
brackets, 4 Links for lifting with chains, 5 Attachment point
alue \ beams
(see figure 2 and figure 10).
(see Figure
4):
4: Lift spreader parts: 1 Frame section, 2 Guide pins, 3 End
(see Figure 1).
(see figure
3).
Figure
2: The lift spreader may only be loaded inward
Figure
3: The arms of the lift spreader must be able to
move freely. The maximum opening angle for the lift
spreader is 120°.
Page 1/4
Instructions for use
original