Alula RE207 Manuel

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Alula RE207. Alula RE207 4 pages. Outdoor door/window sensor

Imprimer la page

Resolution Compatibles

Outdoor Door/Window Sensor

transmitter with industry-leading wireless range and battery

life. It is designed to sense the opening and closing of

gates, sheds, and other outdoor open/close applications.

An alarm signal will be transmitted when the magnet is

pulled away from the sensor, or when an external contact is

opened.

Features

• Industry-leading wireless range and battery life

• Wide magnetic gap distance

• Two built-in external contact zones

• Secure encrypted wireless transmissions

• IP67 waterproof enclosure rating

• 5-year warranty

Enroll

all variants by entering their serial numbers into the

security panel. Alternatively, the sensor can be enrolled in

one of the following ways:

DSC®, Qolsys® and Interlogix® variants are enrolled by

placing the panel into enrollment mode, and then pulling

the battery tab or tampering the device.

Honeywell® and 2GIG® variants are enrolled by placing

the panel into wireless enrollment mode and either

removing the battery tab while holding the tamper, or by

tripping the device three times. These sensors must be

enrolled as a "Loop 2" sensor.

Enrollment of External Contacts

• Interlogix External 1 replaces reed switch if installed.

Interlogix External 2 is enrolled by powering up the

sensor while holding the tamper.

• Honeywell & 2GIG External 1 & 2 should be enrolled

as Loop 1 and Loop 3, respectively. Enroll each

external by tripping it 3 times.

• DSC Externals are enrolled by tripping the desired

external while the device is tampered.

Install

by first attaching the mounting plate and magnet to a

door, window, or fence using screws (provided) or cable ties

(not provided).

Mounting Tips

• Face of mounting plate marked "Flat Mount" is to be

mounted against flat surfaces (e.g. square wood post).

• Face of mounting plate marked "Pole Mount" is to be

mounted against round surfaces (e.g. fence post).

Use the panel installation guide to verify proper system setup.

Outdoor Door/Window Sensor

is a full-featured security

Mounting Screw Holes

Magnet

Alignment Marks

Cover-Securing Screw Hole