Alula RE210P Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Alula RE210P. Alula RE210P 4 pages. Indoor motion sensor-pet immune honeywell compatible

Imprimer la page

Resolution Compatibles

The Indoor Motion Sensor

or when the external contact is opened. It is battery

powered and requires no installation tools. A Pyroflex

sensor with HighBar

leading pet immunity and catch performance.

Features

• Industry-leading pet immunity and catch performance

• Supports both motion zone and an external contact zone

• Mountable on walls or in corners

• 5 year warranty

Enroll

by placing the panel into wireless enrollment mode and

then tripping the tamper three times.

Enrollment Tips

• Program as an RF type (Supervised RF)

• Loop 1 = Motion

• Loop 2 = External Contact

• Loop 4 = Tamper

Install

using the included 3M VHB

sensor on a wall or in a corner. The tape should be applied

to the back when wall mounting or to the back bevels when

corner mounting. Alternatively, screw mounting can be

done by punching out the screw mounting holes.

Installation Tips

• Mount 7.5 to 9.5 feet from the floor for an

optimal balance between catch performance

and pet immunity.

• Remove the cover and circuit board before

trying to punch out the screw mounting holes.

• Ensure the bug foam stays intact and

snug around the IR sensing element when

re-installing the circuit board.

External Contact (not evaluated by ETL)

• Use a normally-closed contact because the

motion sensor will transmit an alarm when it

sees the external contact open.

• Do not use end-of-line resistors.

Verify proper enrollment and operation using your control panel's installation manual.

RE210P Indoor Motion Sensor

-Pet Immune Honeywell

alarms when motion is sensed

signal processing allows for industry-

™

tape to adhere the motion

Compatible

™

Mounting Screw Holes

Ceiling

Floor