Alula Connect+ Manuel de démarrage rapide - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Alula Connect+. Alula Connect+ 8 pages.
Également pour Alula Connect+ : Manuel de configuration du matériel (2 pages)
Imprimer la page
26
Adding Z-Wave automation devices to your Connect+ Hub. Follow the Z-Wave device maker's directions
to initiate inclusion for the Z-Wave device. Once the device is in Z-Wave inclusion, tap the GEAR icon (1) in
the Alula App, then tap Manage Systems (2). Then tap Z-Wave Inclusion Mode (3). Wait for the Connect+
to complete the link with the Z-Wave device also in inclusion mode. After INCLUSION (4), your device will
appear in the DEVICES (5) tab. Test control with the Alula App as you're standing next to the device to validate
operation. PRO TIP: If your Z-Wave device was already programmed to another automation hub, it must be first
excluded to link to the Connect+ Hub. Before networking your device to Connect+, follow the Z-Wave device
maker's instructions to exclude the device.
27
Using the Alula
App's scene creation
you can program
many automation
actions to enhance
your connected
premises and
automate daily tasks.
If you ordered your
system automation-
ready, your Connect+
Hub is ready to
communicate with
Z-Wave and Z-Wave
Plus devices. Simply
choose a trigger like
Armed Night and connect actions like locking the front door deadbolt and turning down the heat set point.
Your place just got safer and smarter. Tap MORE at the bottom (1). Tap SCENES at the top (2). Tap
scene (3). Set TRIGGERS AND ACTIONS (4). SAVE the new automation scene (5). ACTIVATE the new scene (6).
Page 8
+
to add a