Alula RE614-Au Manuel de démarrage rapide
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Alula RE614-Au. Alula RE614-Au 13 pages. Smoke alarm connect+ encrypted
Imprimer la pageSmoke Alarm
station fire-protection device that
alarms when it detects smoke.
Features
• Complies with AS 3786-2014+A1:
• Encrypted wireless transmissions
• Sealed 10 year battery
• 5 year warranty
Quick Start Guide
1. Remove the cardboard piece
between the mounting plate and
smoke alarm.
2. Restore the mounting plate and
twist it fully onto the smoke alarm.
Note: Enrollment is possible only
if the mounting plate is twisted
onto the smoke alarm.
3. Enroll the smoke alarm by placing
the panel into wireless enrollment
mode and then holding down the
smoke's test button until the smoke
alarm beeps.
4. Remove the mounting plate and
refer to Sections 2 and 6 for
positioning and installation.
5. After mounting plate is installed
restore the smoke alarm onto the
mounting plate and fully test the
smoke alarm per Section 7.
Alternate Enrollment Methods
• Scan the smoke alarm's bar code
using the Connect+ Installer
App, OR
• Enter the 8-character serial
number on the interactive service
provider's web portal.
Read and retain carefully for as long as the product is being used. It contains
vital information on the operation and installation of your Alarm. The leaflet
should be regarded as part of the product. If you are just installing the unit,
the leaflet must be given to the householder. The leaflet is to be given to
Use the Panel's installation guide to verify proper system setup.
RE614-Au Smoke Alarm
is a supervised single
any subsequent user.
Connect+
2015
Encrypted
™
300 mm
minimum
Position Smoke Alarm
Test Smoke Alarm
I
300 mm
minimum