ALUMAVENT 3965 Series Manuel d'installation, d'utilisation et d'entretien - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'installation, d'utilisation et d'entretien pour {nom_de_la_catégorie} ALUMAVENT 3965 Series. ALUMAVENT 3965 Series 6 pages. Control dampers
Imprimer la pageIMPORTANT: Failure to follow instructions will void all warranties.
IMPORTANT: MODEL SERIES' 3100 AND 3900 DAMPERS WITH VISIBLE/EXPOSED SIDE BLADE
LINKAGE INSTALLED IN OR NEAR EXTERIOR WALLS MUST BE INSTALLED WITH EXPOSED
LINKAGE TOWARDS INTERIOR OF BUILDING.
3965 Series shown with jumper and mullion end caps installed
Installation Instructions
See Jackshaft
Instructions
The number of sections in a damper assembly is not limited, however they must not exceed the
maximum section sizes listed below. Only the largest single piece of these dampers is designed to
be self-supporting. Bracing may be required for multiple section damper assemblies to sustain the
assembly's weight and keep it from collapsing under system pressure. To support the damper
horizontally, Alumavent suggests suitable bracing (installer is responsible for suitable bracing). To
avoid sagging due to damper weight, support ductwork in the area of the damper.
Installation Instructions
See Jumper
Instructions
pg. 3