Artos F904A-VO Manuel d'installation - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Artos F904A-VO. Artos F904A-VO 8 pages. 3/4 ” thermostatic valve
Imprimer la pageOperating Specifications
⃞
Maximum: 120°F
⃞
Maximum: 185°F
⃞
Minimum: 50°F higher than mixed
⃞
Advisable: 150°F - 160°F
⃞
Minimum difference between hot and mixed temperature 50°F
⃞
Maximum:
⃞
Minimum:
⃞
Recommended: 30 - 95psi
⃞
Operating pressures (on hot and cold lines) should be kept as balan-
ced as possible, in order to assure the maximum efficiency.
⃞
ASSE 1016.ASME A112.18.1/CSA B125.1 Certified
Prior to Installation
⃞
Read through all of these instructions
⃞
This product is part of a custom shower or bath system. Carefully
plan the installation before beginning. Decide location and
spacing of all components in the system (see typical systems at the
back of this booklet).
⃞
The top outlet is for the shower components and the bottom outlet is
for a tub spout. Blank off the tub outlet if not using
⃞
Observe all local building and plumbing codes and shut off the main
water supply before commencing pipe work
⃞
If soldering close to the valve, remove the headwork to avoid dam-
904A30513
Mixed water temperature
Hot Water Supply Temperature
Operating Pressure
125psi
20psi
Standards