CUTRA CtrlAX Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} CUTRA CtrlAX. CUTRA CtrlAX 16 pages.

�

Replacement of blades and blade ﬁxtures

▶ Replacing blade and the blade ﬁxture

�. Turn oﬀ the power and remove the blade by loosening the set screw.

�. Place the new blade in the concave part of the blade ﬁxture. Do not assemble the blade and

set screw diagonally

�. Tighten the set screw until it makes a "click" sound with a torque wrench.

�. After ensuring that the blade is tightened, turn

on the main power and press the operation

button to see if it works normally.

View after assembly is complete

Blade

▶ Precautions for replacing blade and the blade ﬁxture

- Turn oﬀ the power of the device.

- If the blade or the blade ﬁxture is

contaminated or damaged, such as being

blackened, remove the contaminants or

replace them with new ones.

- If it is not working properly, wipe the

oscillator with a cotton swab.

(After cleaning it with alcohol, make sure it is

fully dried before assembly.)

�

Blade ﬁxture

Set screw

�

Oscillator

- Use a torque wrench to tighten the set screw.

- Be careful not to get injured when handling

the blade.

- Be careful because the blade, collet, mountain

bolt, and the oscillator are very hot right after

use because of the frictional heat generated

by ultrasonic vibration.

P. ��