Artos MR12045 Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Artos MR12045. Artos MR12045 7 pages. Ryton towel warmer

Bracket Installation:( u se diagram 1 below as a guide )

1. Attach the smaller tube to the towel warmer with the smaller bolts provided.

2. Determine the wall location of larger tube by measuring the brackets attached to towel

warmer or by using the spec sheet as a guide. Attach larger tube to wall with hole for

locking screw facing down on the bottom brackets and facing up on the top brackets.

3. Insert the smaller tubes ( now attached to towel warmer ) into the larger tubes and fas-

ten with the locking screw.

Diagram 1

Valve Installation: ( use Diagram on page 6 as a guide )

1. Thread # 1 male stub into female inlets on bottom of towel warmer using a threadlocking

substance.

2. Push # 2 compression fitting onto supply pipe and tighten onto valve body.

3. Tighten #1 male stub ( now attached to towel warmer ) onto valve.

4. Insert blanking plugs ( provided with brackets ) into female inlets located at the top of

towel warmer.

5. Check for leaks.

Smaller tube

INSTALLATION STEPS

Locking screw

Larger tube