DKT Comega forsete-ii series Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DKT Comega forsete-ii series. DKT Comega forsete-ii series 12 pages. Cpe
Imprimer la page
device script commands
The following commands are supported in the script that will be downloaded to the CPE via TFTP during
boot-up process.
This command is used to configure the switch in the unit. The command takes one or more of the following
parameters, with the syntax switch --nn or conf xx.
The 79741/742 models have 4 LAN ports, whereas 79734 model has 1 LAN port. The port outline and port
mapping is as follows, shown from the front:
4 port (79741/742):
LAN1
LAN2
LAN3
LAN4
1
2
3
4
Please refer to syntax guide for Command Line Interface, to configure VLAN, QoS
etc. parameters
7