Artos 45-725 Manuel du propriétaire - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Artos 45-725. Artos 45-725 10 pages. Wire prepper lite

Tighten screw until snug—make a sample cut and tighten or loosen screws as needed to

‐

produce a clean cut.

Maintenance

Periodic oiling of the blade arm is required. Two drops of oil where the blade arm pivots.

‐

The frequency will depend on usage.

Trouble Shooting

Machine Will Not Function, All Switches Do Not Work



Turn the machine off and then back on to reset the machine electronics.

Cutters Cycles Continuously



Check cutter home sensor switch located under the top plate. When the cutter arm is in

the home position, the steel vane should be inside the switch slot. Adjust the steel vane

so that the cutting blade clears the cutting hole when in the home position.

Blade Clears Cutting Hole

OIL HERE

Home Sensor Switch