Aluprof ER-P Series Manuel de programmation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de programmation pour {nom_de_la_catégorie} Aluprof ER-P Series. Aluprof ER-P Series 8 pages.
Également pour Aluprof ER-P Series : Manuel de programmation (9 pages)
Imprimer la page
6. MANUAL SETTINGS OF LIMIT POSITIONS
UPPER
On the transmitter press
the „P2" button.
On the transmitter press
the „P2" button.
LOWER
Press the „DOWN" button
and hold for 2 seconds.
Press the „P2" button again.
If the motor doesn't accept programming, proceed to step 8.
4
PROGRAMMING MANUAL FOR AM45 MOTORS ER-P SERIES
The motor will make a short
move DOWN - UP.
The motor will make a short
move DOWN - UP.
Press STOP when courtan reache
limit position, correct the position
if needed.
The motor will make a short
move UP - DOWN.
Press the „UP" button and hold
for 2 seconds.
The upper limit position has been set.
On the transmitter press
the „P2" button.
The lower limit position has been set.
Press STOP when courtan reache
limit position, correct the position
if needed.
The motor will make a short
move DOWN - UP.
We reserve the right to any technical change.
Valid on 2022.01.27