Aluprof AC151-06 Manuel de programmation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de programmation pour {nom_de_la_catégorie} Aluprof AC151-06. Aluprof AC151-06 4 pages.

Imprimer la page

- The setting mode will close after 60 seconds of inactivity and the changes will not be saved.

- Press and hold the "STOP" button for 3 seconds to cancel the entire procedure.

- To automatically control receivers from all the channels seting up a group channel on the transmitter is required. Group channel is

active when all channels numbers are highlighted.

- The symbol "00 : 00" in the automatic control time settings means that the control is not active.

- It is possible to set the days of the week in automatic control in three modes: 1. Selected day of the week, 2. The whole week, 3.

Working days + Weekend.

3. OPERATING MODE CHANGE

Press and hold "SET" button

for 3 seconds. The time icon

will flash.

Manual mode - without time control function,

Automatic mode - with time control function,

Random mode - with time control function with a random selected time within ± 15 minutes to the set automatic time.

Press and hold the "LEFT" and "RIGHT" buttons for 3 seconds to quickly activate / deactivate the manual mode.

4. SETTING THE CURRENT TIME AND DAY OF THE WEEK

Press and hold "SET" button

for 3 seconds. The time icon

will flash.

By pressing the „UP" or „DOWN"

buttons, settings of the

minutes can by change.

PROGRAMMING MANUAL OF THE AC151-06 TRANSMITTER

Press the "RIGHT" button.

The operating mode icon

will flash.

Press the "STOP"

button. Hour digits will

flash.

By pressing the "LEFT" or

"RIGHT" buttons, settings of the week

days can by change.

Press the "UP" or

"DOWN" button to change

the operating mode

By pressing the „UP" or

„DOWN" buttons, you can

change the hour settings.

Press and hold "SET" button for 3

seconds till flashing of the icons on LCD

will stop, which means that the changes

to the settings have been saved.

Press and hold "SET" button for 3

seconds till flashing of the icons on

LCD will stop, which means that

the changes to the settings

have been saved.

Press the "STOP" button again.

Minutes digits will flash.

We reserve the right to any technical change.

Valid on 2022.03.16