DLab SK-O330-Pro Manuel d'entretien - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} DLab SK-O330-Pro. DLab SK-O330-Pro 11 pages. Lcd digital shaker

Imprimer la page

PCB etc.; Motor Modules: motor, Counterweight, Support, Eccentric Axis, Bearing, Turnplate etc.;

Rocker Module: Rocker Plate, Rocker Panel, Shrapnel, Bracket etc.; Upper Guard Module: Upper

Guard, LCD PCB, Knob etc.

Power supply: 220/110V → power outlets → PCB → system control power supply

Movement: motor drives Movement Module to rotate. According to a different lock screw

location on Rocker Plate, the movement pattern of shaker is different.

Speed feedback: the motor speed is accurately measured by the Shaft Encoder fixed on the

motor along with photoelectric switch and a feedback is given.

LCD display: LCD PCB is connected to Master Control Board and displays user's settings

and current equipment operation information.

Chapter 2: Removal and Installation of Instrument

When instrument failure occurs, first, you should conduct a failure analysis; if the failure is caused

by the damage of instrument hardware, the related component must be repaired or replaced. Here

are the relevant contents of the replacement and disassembly of instrument.

2.1 Removal

Tool：Cross screwdriver, Diagonal Pliers, Allen key, socket spanner

Step 1:

Turn the instrument upside down,

remove the screws at the red circle

icon;