dlb AIJGO-22LCD Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} dlb AIJGO-22LCD. dlb AIJGO-22LCD 16 pages. Personal grounding tester with lcd display and dual foot electrode

1.
Steel touch button with 9 RGB LEDs
Combined 4 mm banana plug and 10 mm snap
2.
socket for connecting wrist strap/groundable
ESD smock
Switch for test type selection: if the upper
position is selected, the footwear system and
3.
wrist strap/groundable ESD smock system are
tested, if the lower position is selected,
only the footwear system is tested
4.
LCD display
Green 4 mm banana plug socket:
5.
calibration test point
8-pin socket which can be used to connect
foot electrode wires and relay output wires,
6.
but if you place the tester on a stand, it is also
worthwhile to connect the power supply
through this.
Switch for setting the footwear system
measurement resistance limit value; after
7.
setting a different limit from the one used
previously, the device must be restarted for the
change to take effect
8.
12 V power supply connection socket

PARTS OF THE TESTER

6
4
3
2
6
8
1
5
7