ARTRAY ARTCAM-031TNIR Livret d'instructions - Page 18

Parcourez en ligne ou téléchargez le pdf Livret d'instructions pour {nom_de_la_catégorie} ARTRAY ARTCAM-031TNIR. ARTRAY ARTCAM-031TNIR 18 pages. Near-infrared light ingaas sensor usb camera artcam-tnir series

Imprimer la page
10. Recommended PC
10-1 Recommended System Requirements
●Intel chip set, Southbridge above ICH6
●CPU: Intel Core2duo 2.4GHz or higher
●Memory: ≧512MB
●OS: ≧Windows XP
10-2 Minimum System Requirements
●USB2.0 Enhanced Host Controller
●CPU: Intel Pentium4 1.7GHz or higher
●Memory: ≧256MB
●OS: ≧Windows XP
Caution
■Please refer the restrictions below when you use ARTCAM.
(1) Recommended System Requirements
If the system specifications do not meet the requirements recommended above, it may be difficult to run at the
maximum frame rate.
(2) Connection of Multiple USB Devices
Please be aware that depending on the specifications of the user's PC, it may be difficult to supply the power to the
USB devices when multiple USB devices are connected.
(3) USB2.0 cable Extension
We cannot guarantee the functionality of the USB2 camera if the user adopts USB3.0 extension cables or repeaters
which are not confirmed by us. With the extension cables or repeaters, the bandwidth of transfer may differ, and thus
caused malfunctions such as a low frame rate or recognition failure on the camera.
What may cause the problem is that the regulation of the power lines becomes not enough, and so causes impudence
mismatch on data signals.
*For the recommended extension cable, please contact our sales department. (TEL: +81-3-3389-5488)
ARTRAY CO., LTD.
1-17-5 Kouenjikita, Suginami-ku, Tokyo 166-0002 Japan
Tel: +81-3-3389-5488
44 100 16 82 0167
- 18 -
Fax: +81-3-3389-5486
URL: www.artray.us