Artrom DHP-20R Manuel du propriétaire - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Artrom DHP-20R. Artrom DHP-20R 14 pages.

Imprimer la page

OPERATING THE UNIT

Removing the collected water

There are two ways to remove collected water.

1. Use the bucket

When the unit is off,if the bucket is full, the unit will

beep 8 times and the Full indicator light will flash, the

digital display shows P2.

When the unit is on,if the bucket is full, the compressor

turns off and the fan turns off after 30 seconds for drying

the water of the condenser, then the unit will beep 8

times and the Full indicator light will flash, the digital

display shows P2.

Slowly pull out the bucket. Grip the left and right

handles securely, and carefully pull out straight so

water does not spill. Do not put the tank on the floor

because the bottom of the bucket is uneven. Otherwise

the bucket will fall and cause the water to spill.

Throw away the water and replace the bucket. The

bucket must be in place and securely seated for the

dehumidifier to operate.

The machine will re-start when the bucket is restored

in its correct position.

NOTES:

When you remove the bucket, do not touch any parts

inside of the unit. Doing so may damage the product.

Be sure to push the bucket gently all the way into the

unit. Banging the bucket against anything or failing to

push it in securely may cause the unit not to operate.

When you remove the bucket,if there is some water in

the unit you must dry it .

2. Continuous draining

Water can be automatically emptied into a floor

drain by attaching the unit with a water hose

(not included).

Cut the cover down from the back drain

hose outlet. Attach a drain hose(ID=13.5mm)

and lead it to the floor drain or a suitable

drainage facility(see Fig.7).

Make sure the hose is secure so there are no leaks.

Direct the hose toward the drain,making sure that

there are no kinks that will stop the warter flowing.

Place the end of the hose into the drain and make sure

the end of the hose is level or down to let the water flow

smoothly.Do never let it up.

Select the desired humidity setting and fan speed

on the unit for continuous draining to start.

NOTE: When the continuous drain feature

is not being used,remove the drain hose

from the outlet.

1. Pull out the bucket a little.

Fig.5

2. Hold both sides of the bucket

with even strength, and pull it

out from the unit.

Fig.6

3. Pour the water out.

Cut the cover down

Attach the hose

to the drain

hose outlet.

Care and cleaning of the dehumidifier

Turn the dehumidifier off and remove the plug

from the wall outlet before cleaning.

1. Clean the Grille and Case

Use water and a mild detergent. Do not use bleach

or abrasives.

Do not splash water directly onto the main unit. Doing

so may cause an electrical shock, cause the insulation

to deteriorate, or cause the unit to rust.

The air intake and outlet grilles get soiled easily, so use

a vacuum attachment or brush to clean.

2. Clean the bucket

Every few weeks, clean the bucket to prevent growth of mold,

mildew and bacteria. Partially fill the bucket with clean water

and add a little mild detergent. Swish it around in the bucket,

empty and rinse.

NOTE: Do not use a dishwasher to clean the bucket.

After clean, the bucket must be in place and securely

seated for the dehumidifier to operate.

3. Clean the air filter

The air filter behind the front grille should be

checked and cleaned at least every 30 days

or more often if necessary.

NOTE: DO NOT RINSE OR PUT THE FILTER

IN AN AUTOMATIC DISHWASHER.

To remove:

Grip the tab on the filter and pull it upward, then

pull it out as shown in Fig.8.

Clean the filter with warm, soapy water. Rinse and

let the filter dry before replacing it. Do not clean the

Fig.7

filter in a dishwasher.

To attach:

Insert the air filter into the unit from underside to

upside. See Fig.10.

CAUTION:

DO NOT operate the dehumidifier without a filter

because dirt and lint will clog it and reduce

performance.

4. When not using the unit for long time periods

After turning off the unit, wait one day before emptying

the bucket.

Clean the main unit, water bucket and air filter.

Cover the unit with a plastic bag.

Store the unit upright in a dry, well-ventilated place.

CARE AND MAINTENANCE

Fig. 8

Fig. 9

Fig. 10