Artrom YL-2010G Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Artrom YL-2010G. Artrom YL-2010G 10 pages.

For safety reasons, take care when children are in the surrounding of the

device, as with any other electrical device.

Have any repairs only carried out by a recognized service engineer or your

supplier. Follow the instructions for use and maintenance as indicated in this

manual.

Always remove the plug of the unit from the wall socket when it is not in use.

A damaged power cord or plug must be replaced by a recognized electrician

or your supplier.

A TTENTION !

Never use the device with a damaged power cord, plug, cabinet or

control panel. Never trap the power cord or allow it to come into

contact with sharp edges.

Failing to follow the instructions may lead to nullification of the

guarantee on this device.

CONTROL LIGHTS ON THE CONTROL PANEL

The device is in operation when this lights is on.

OPERATION

1 Ensure that the ON/OFF button is in the OFF(○) position before inserting

the plug into the wall outlet.

2 Ensure that the water container has been positioned correctly.

3 To turn on the device switch the on/off button to the on (│) position. The

light in the button will turn on and a beep signal can be heard. The fan will

now start running.

The device will start to dehumidify when the compressor starts. The compressor

starts three minutes after the device is turned on.

The compressor will switch off automatically when the water container is full.

As long as the water container is not full, the device will continue operating until

switched off manually.

4 To turn the device off, simply press the ON/OFF button to OFF (○).

Minimum operating condition 5℃ at 50% relative humidity.