Alutech SDP Manuel d'installation et d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Alutech SDP. Alutech SDP 4 pages. Photoelectric sensor

Imprimer la page

STORAGE, TRANSPORTATION, DISPOSAL

he installation location of the sensor must ensure continuity of signal when the door leaf

is in the area of the sensor operation.

The sensor must be installed at a sufficient distance from the moving parts of the doors.

Contact between the moving parts of the doors and the sensor must be excluded. Keep

in mind that light objects reflect the light better than dark ones and therefore they can

be detected from a greater distance.

Before starting the work on connection, make sure that the loading equipment unit is

deenergized.

The connection cable must be protected from contact with any rough and sharp surfaces.

STORAGE, TRANSPORTATION, DISPOSAL

Storage of the product should be carried out in a packed form in closed dry premises, air tem-

perature is 0 ... + 25° C, relative humidity is not more than 80 %, in the absence of acidic, alkaline

and other aggressive impurities in the air. The possibility of exposure to atmospheric precipitation

and direct sunlight should be excluded. Shelf life is 5 years from the date of manufacture. Trans-

portation can be carried out by all types of covered ground transport providing the exception

of impacts and movements inside the vehicle.

Disposal is carried out in accordance with the regulations and legal acts on processing

and disposal in force in the country of the Customer. The product does not contain

precious metals and substances that pose a danger to life, health of people and the

environment. Service life is 8 years.

WARRANTY OBLIGATION

In compliance with the rules of storage, transportation and operation the operability of product

is guaranteed. The warranty period is 1 year and it is calculated from the date of transfer of the

product to the Customer or from the date of manufacture, if the date of transfer is unknown.

During the warranty period, malfunctions caused by the fault of the Manufacturer are eliminated

by the Service Department that provides warranty maintenance.

Note:

Parts replaced under warranty become the property of the Service Department that carried out

the repair of the product.

The Manufacturer's warranty is not provided in case of::

•

violation of the operation and storage rules of the product;

•

changes in the design of the product by persons not authorized to perform these works;

damage by the Customer or third parties to the design of the product;

•

damage of the product;

•

actions of force majeure (fires, lightning, floods, earthquakes and other natural disasters).

INSTALLATION AND OPERATION MANUAL. SDP PHOTOELECTRIC SENSOR