ARTronic ART Power MINI 500 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ARTronic ART Power MINI 500. ARTronic ART Power MINI 500 15 pages. Artronic art power mini inverters user manual

Imprimer la page

WARNING

1. Provide adequate ventilation from the battery compartment. The battery

enclosure should be designed to prevent accumulation and concentration

of hydrogen gas at the top of the compartment.

2. Input/output AC wiring and battery cables must be rated for 75

higher. Using cables diameter, please refer to appendix A, according to

different models. The inner diameter of the copper ring terminal which is

used to connect battery cables to ART Power MINI DC terminals should

be no less than 6mm.

3. For battery installation and maintenance: read the battery manufacturer's

installation and maintenance instructions prior to operating.

PERSONAL PRECAUTIONS

Have plenty of fresh water and soap nearby in case battery acid

contacts skin, clothing, or eyes.

Avoid touching eyes while working near batteries.

NEVER smoke or allow a spark or flame in the near vicinity of a battery.

Remove personal metal items such as rings, bracelets, necklaces, and

watches while working with batteries. Batteries can produce short circuit

current high enough to make metal melt, and can cause severe burns.

If a remote or automatic generator start system is used, disable the

automatic starting circuit or disconnect the generator to prevent accident

during servicing.

C or