Ainfox LS-EF017 Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Ainfox LS-EF017. Ainfox LS-EF017 8 pages. Bladeless cooling fan

added for one hour by pressing each time. Determine the timing in a few seconds.

4. Press the "Osc"

button, the Osc outlet will starts to run, press again to stop the

rotation, and then start → stop → start in cycle.

5. Press the "Cool"

button, and the water pump starts to work. When the water tank

is short of water, the cooler machine will give buzzing alarm, and then the "Cool"

indicator will flash. After adding some water, then press the "Cool" button, stop the

buzzing alarm.

6. Press "Humid"

button to start humidification function

(1) When the cooler machine is operating with the "Cool" function, and press the

"Humid" button, if the water does not reach the min water level, the buzzing alarm will

start, and then the "Cool" indicator will flash; if the water exceeds the min water level,

the humidification function will start.

(2) When the machine is operating with the normal wind function (no cool), and press the

"Humid" button, if the water does not reach the min water level, the buzzing alarm will

start, and then the "Cool" indicator will flash; if the water exceeds the min water level,

the humidification function will start.

(3) Only start humidification function: when the whole machine is in standby mode,

press the "Humid" button, if the water does not reach the min water level, the buzzing

alarm will start, and then the "Cool" indicator will flash; if the water exceeds the min

water level, the humidification function will start. (Note: the water shall not exceed the

max water level)

Tip: the light will black out in 3 minutes after the last operation, but the fans will still

keep working.