Alva GH301 Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Alva GH301. Alva GH301 12 pages.

Fig.C

The regulator goes directly into the cylinder valve.Always

make sure the regulator bottoms fully. The use of any adap-

tors is illegal.

Screw the regulator into the cylinder valve. DO NOT use a

tool to tighten the regulator; it is to be hand-tightened only.

Open the control valve 1½ turns to the left (anti-clockwise).

(Figure C)

Push the control knob down for at least 20 seconds, but

DO NOT try to ignite the heater. This will allow gas to flow

through the heater,making the leak test possible.

DO THE LEAK TEST (page 4)

Hold up the cylinder holder (FIG D), place the filled gas

cylinder onto the back of the heater with the cylinder valve

wheel facing outwards. The cylinder foot ring locates onto

the cylinder support foot ring (FIG E). Secure the cylinder by

locating the cylinder holder over the cylinder valve protection

shroud and connecting the regulator (FIG F).

Fig.E

Fig.D

Fig.F