Alvarado IntraQ-X Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Alvarado IntraQ-X. Alvarado IntraQ-X 20 pages.

Mounting Process

1. Use a #1 Phillips-head driver to remove the four Phillips-head screws and pull the electronics assembly

away from the backplate assembly

2. Secure the backplate to the wall using appropriate mounting hardware. Pull the Ethernet cable and door

strike wires through the open area for conduit wiring on the back plate while you do so.

If the mounting hardware is metal, ensure it does not come into direct contact with any

NOTE

metal on or inside the wall.

3. Connect the wires for the door strike based on the wiring diagrams presented in the

Wiring

section above.

Page 11

For Assistance: [email protected] +1 (909) 591-8431

IntraQ-X Installtion Guide Version 2.0

Door Lock/Strike

PUD4253R3-0