Alvarion BreezeNET BU Manuel d'installation rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Alvarion BreezeNET BU. Alvarion BreezeNET BU 9 pages.

Imprimer la page

8. Mount the indoor unit and connect the outdoor-to-indoor cable to

its RADIO port. Connect the indoor unit to the AC mains using the

power cord supplied with the unit.

NOTE:

The indoor unit should be connected to the power

source only after it has been connected to the outdoor

unit.

The color codes of the power cord are:

9. Use a straight Ethernet cable to connect the ETHERNET port to a

Hub/Switch. Use a crossed Ethernet cable to connect directly to a

PC's NIC.

Basic Configuration

1. Initial configuration can be performed either via Telnet or using

the configuration utility.

2. Connect a PC to the Ethernet port, using a crossed cable. The

default IP address is 10.0.0.1.

3. If you use Telnet for initial configuration, run the Telnet program.

Select your permitted access level and enter your password (the

default Installer password is "user"). Access the Basic

Configuration menu and configure the basic parameters required

to allow connectivity with the base station and to support remote

management of the unit. In many installations, most of these

parameters should not be changed from their default values. The

following list includes the basic parameters and their default

values:

Parameter

Change Unit Type to

RB (in Unit Control

Menu)

Ethernet Port

Negotiation Mode

IP Address

Subnet Mask

Default Gateway

Address

DHCP Option

Access to DHCP

ESSID

Brown

Blue

Yellow/green

Basic Configuration

Default

Auto

Negotiation

10.0.0.1

255.0.0.0

0.0.0.0

Disable

BU: From

Ethernet Only

RB: From

Wireless Only

ESSID1

Phase

Neutral

Grounding

Comment

If necessary.

Reset before

continuing with

configuration.

- 3 -