DLSIN DLA012NAS Manuel rapide de l'utilisateur
Parcourez en ligne ou téléchargez le pdf Manuel rapide de l'utilisateur pour {nom_de_la_catégorie} DLSIN DLA012NAS. DLSIN DLA012NAS 18 pages. 3.5” sata hdd
2 Bay NAS / Enclosure
3.5" SATA HDD
Configure RAID
RAID Modes
STANDARD
JBOD (USB only)
COMBINE
Span (Big)
MIRRORING
RAID 1
STRIPING
RAID 0
Set RAID
1. Turn off the unit, pushing the Power button on the front panel.
2. Set the RAID switch to the RAID mode of your choice.
3. Press and hold the set "RAID button" as you power on the enclosure by pressing
the "Power button".
4. Once the enclosure has turned on, release the set "RAID button"..
5. Your Desired RAID configuration is now set.
Note: When changing RAID configuraitons, follow the above steps to set the unit back
to STANDARD (JBOD), before setting to a different configuration.
Access Web GUI
Once the enclosure has been attached to a local area network and your RAID configuration
has been set. You can access additional operation and configuration settings using the built-
in web GUI by accessing the NAS IP address using any web browser.
By default the IP address when connected directly to a PC for the DLA012NAS ecnlosure
is: http://192.254.0.1
Note: In order for any device to access the Built-in web GUI, both the enclosure and that
device must be on the same subnet. Once the web GUI has been accessed the default
IP address can be changed therein.
1