10 Bar 220ex Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} 10 Bar 220ex. 10 Bar 220ex 9 pages. Camera housing

exposed to the following classes of chemicals:benzene, toluene, xylene, chlorinated hydrocarbons,

methanol, any other solvents, strong acids and bases.

For long term storage please remove the main o-ring from body.

5.4 Transportation.

When transporting by air, please ensure the housing is not sealed, to allow the air pressure to equalize.

Either remove the O-ring (recommended) or store the body and lid separately.

Please protect the housing during transportation. It is recommended to remove the sync cord, and

wrap the housing in foam or bubble wrap.

5.5 Accidents

The impact resistance of the housing is excellent. However after an accident the alignment of

the housing may have been damaged. Therefore in the event of your housing suffering an impact force,

e.g. being dropped, it is essential you do not use the housing for diving. Please return the housing

immediately for service. Please put a note inside to indicate the nature of the accident, so that we can

assess the severity.

6. Service

To ensure the continued performance of your housing, it should be serviced every year, or

after every 200 dives whichever is earlier. Please note the terms for servicing the housing posted

at our website. A full service will include:

I nspection of all components for wears or damage (report if repair necessary)

Cleaning of all sealing surfaces, and replacement of all O-ring seals.

Hydrostatic pressure test to 10 Bar.

Note: the replacement of damaged components (except replacement O-rings) may

require additional cost.

The warranty is valid within two years from the date of first purchase. The warranty applies

only to the housing itself. 10 BAR does not accept any liability either implicit or otherwise for any

equipment housed inside, or used together with the housing. In the event of the housing flooding

within the period of warranty, 10 BAR will repair or replace the housing. Please

note that disassembly of the housing will invalidate warranty. Please fill in the information

below, and return a copy to 10 Bar Underwater Housing at the address below, to validate the

warranty.

(Copy to be retained by user)