AIO ROBOTICS ZEUS Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} AIO ROBOTICS ZEUS. AIO ROBOTICS ZEUS 2 pages. 3d scanner, 3d printer
Également pour AIO ROBOTICS ZEUS : Manuel de démarrage rapide (2 pages)

Imprimer la page

Z E U S

QUICK-START GUIDE

Getting started

Open door by lifting up and back

Insert power cable in back, switch on

Spool feeds clockwise

Wind excess back onto spool

Squeeze tabs with

thumb and index

Feed filament all the way down

Recommended: start with a Gcode preloaded test

Select a file

Printing starts with automated bed leveling

Select OK

Remove

test printout

Remove interior packaging

Press front on button for 1 second

Press control button

Prep plate with thin layer of glue

Refer to manual for on-board slicing

If .STL is selected you'll be asked to slice

Printing starts after extruder hits target temperature

Extruder will first print a stripe at front of plate

Print with lid open for best results

Place turnable 3 pins facing down

Unwrap filament and feed through tube

Press park button

Press print to access files

Select print

NB: "Box" test file print time:

> 8 mins

Lift glass plate and carefully remove object

from plate when printing is complete.