aion L5 Manuel - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} aion L5. aion L5 20 pages.

BUILD NOTES

DC converter selection
There are several brands and models available, all with the same pinout and similar specifications. Here
are the DC converters we've found that will work in this circuit.
BRAND
PART #
Traco
TEC 3-0923
CUI
PQMC3-D12-D15-S
XP Power
IZ1215S
Recom
RS3-1215D
Mornsun
WRA1215S-3WR2
The Traco TEC 3-0923 is preferred for this circuit because its supply voltage range (4.5V to 13.2V) is
perfectly suited for any type of pedal power supply. The TEC 2-0923 cannot be used since the current
handling is not high enough for the full two-channel preamp.
The other brands all have a minimum supply voltage of 9V. Most nominally 9VDC adapters put out
around 9.6V, which is more than enough—but one very notable exception is the Voodoo Labs Pedal
Power series (and likely other similar pedalboard supplies) which regulate to exactly 9.00V.
These DC converter modules are usually specced very conservatively, so it's very unlikely that there
would be any issues even if the supply voltage was slightly lower than 9V. However, operating on the
extreme lower end of a spec is not ideal from an engineering standpoint, so if we're going to point you to
a specific module, it's going to be the one that works reliably in all use cases.
If you are using a standard wall-wart supply that puts out more than 9V, then all this is immaterial and
any of the five units listed above will work the same. All significant specifications are the same aside
from this input voltage range. We haven't tried all of them directly, but their datasheets indicate they
will perform identically and they have the same pinout and physical dimensions.
This is fortunate, because most suppliers don't stock more than 20 or 30 of each type at a time. So while
we recommend the Traco TEC 3-0923 as the best overall, it will likely not always be in stock, especially
as we release more preamp projects with converters and more people are using them.
If you're having a hard time finding any that will work, try searching
shown in the Part # column. Most of these brands are also carried by DigiKey, Newark, and several other
suppliers, and this engine will search all of the major distributors at once for easier sourcing.
The Mornsun unit is not available from Mouser, but it's included here because it's cheaper than the
others (USD$8.22 as of the time of this writing) with the exact same specs. If you need more than one, it
quickly becomes much more cost-effective than the other options.
L5 PREAMP
MOUSER #
495-TEC3-0923
490-PQMC3-D12-D15-S
209-IZ1215S
919-RS3-1215D
N/A
SUPPLY
NOTES
4.5-13.2V
Preferred option. More sources on Octopart.
9-18V
9-18V
9-18V
9-18V
NAC Semi:
https://aionfx.com/link/mornsun/
Octopart
for the part number
11