Blucave CC-18LI-1 Instructions originales - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions originales pour {nom_de_la_catégorie} Blucave CC-18LI-1. Blucave CC-18LI-1 2 pages. Dc li-ion compact controller

Imprimer la page

TECHNICAL DATA

18V Controller Li-Ion

MODEL: CC-18LI-1

Voltage

18V

mAh

1300mAh

Battery Type

Lithium Ion (Li-Ion)

Weight

0.56Kg

BluCave tools are for private use only and are not suitable

for commercial/professional/continuous use.

The sound intensity level for the operator may exceed

85dB(A) and sound protection measures are necessary.

The values given are valid for nominal voltages of 18V.

For lower voltage these values can vary.

Symbols

The following symbols are important for reading and

understanding the operating instructions. Please take

note of the symbols and their meaning. The correct

interpretation of the symbols will help you to use the

machine in a better and safer manner

WARNING - To reduce the risk of injury during

operation, always read the instructions.

Always wear hearing protection. The effects of

noise can cause hearing loss.

Always wear a dust mask. When working with

wood and other materials, harmful dust may be

generated. Working with asbestos containing

materials is not permitted!

Always wear safety glasses. When working with

electric power tools, sparks, splinters, chips and

dust particles may be generated and these can

cause loss of sight.

BLUCAVE.COM

CC-18LI-1-EU-EN REV 06

DC_LiIon_Controller_IB EU EN REV 06.indd 2

GENERAL POWER

TOOL SAFETY

e. Do not overreach. Keep proper footing and balance at

WARNINGS

f. Dress properly. Do not wear loose clothing or jewellery.

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

g. If devices are provided for the connection of dust

instructions may result in electric shock, fire and/or

9 12 15

serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your

4. POWER TOOL USE AND CARE

mains-operated (corded) power tool or battery-operated

a. Do not force the power tool. Use the correct power

(cordless) power tool.

1. WORK AREA SAFETY

a. Keep work area clean and well lit. Cluttered or dark

b. Do not use the power tool if the switch does not turn

areas invite accidents.

b. Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases or

dust. Power tools create sparks which may ignite the

c. Disconnect the plug from the power source and/or the

dust or fumes.

c. Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

2. ELECTRICAL SAFETY

d. Store idle power tools out of the reach of children and

a. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

e. Maintain power tools. Check for misalignment or

b. Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body

is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

f. Keep cutting tools sharp and clean. Properly

electric shock.

d. Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

g. Use the power tool, accessories and tool bits etc.

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric

shock.

f. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

5. BATTERY TOOL USE AND CARE

protected supply. Use of an RCD reduces the risk of

a. Recharge only with the charger specified by the

electric shock.

3. PERSONAL SAFETY

a. Stay alert, watch what you are doing and use common

b. Use power tools only with specifically designated

sense when operating a power tool. Do not use a power

tool while you are tired or under the influence of drugs,

alcohol or medication. A moment of inattention while

c. When battery pack is not in use, keep it away from

operating power tools may result in serious personal

injury.

b. Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal

d. Under abusive conditions, liquid may be ejected from

injuries.

c. Prevent unintentional starting. Ensure the switch is

in the off-position before connecting to power source

and/or battery pack, picking up or carrying the tool.

Carrying power tools with your finger on the switch or

6. SERVICE

energising power tools that have the switch on invites

accidents.

a. Have your power tool serviced by a qualified repair

d. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal

injury.

all times. This enables better control of the power tool

in unexpected situations.

7060542, Model Nr. CC-18LI-1 is according to the basic

Keep your hair, clothing and gloves away from moving

Directives Electromagnetic Compatibility 2004/108/EC

parts. Loose clothes, jewellery or long hair can be

(EMC). For the evaluation of conformity, the following

caught in moving parts.

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

battery pack from the power tool before making any

adjustments, changing accessories, or storing power

Distributed by:

tools. Such preventive safety measures reduce the risk

of starting the power tool accidentally.

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

binding of moving parts, breakage of parts and any

other condition that may affect the power tool's

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

battery packs. Use of any other battery packs may

create a risk of injury and fire.

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a fire.

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

EC-Declaration of conformity

We, the Batavia GmbH, Blankenstein 180, NL-7943PE

Meppel, declare by our own responsibility that the

product DC Li-Ion Compact Controller, Item-No

requirements, which are defined in the European

harmonized standards were consulted: EN 60745-1:

2009+A11,

Meppel, 01 september 2011

Meino Seinen, QA Representative

Batavia GmbH, Blankenstein 180,

7943 PE Meppel, Netherlands

Batavia GmbH

Blankenstein 180

7943 PE Meppel - Netherlands

Office phone: +31 (0) 522 820200

www.batavia.eu

22/06/2004 1:57:06 AM