Blucave TRS-600-1 Instructions originales

Parcourez en ligne ou téléchargez le pdf Instructions originales pour {nom_de_la_catégorie} Blucave TRS-600-1. Blucave TRS-600-1 2 pages.

Imprimer la page

RECIPROCATING SAW

ORIGINAL INSTRUCTIONS

MODEL NO: TRS-600-1

GETTING TO KNOW YOUR

BLUCAVE POWER TOOL:

Assembly.....................................................................

ToolBod and Controller...............................................

Fitting Saw Blades......................................................

Adjusting the Shoe.....................................................

Operation....................................................................

Switching On/Off........................................................

Speed...........................................................................

Storage........................................................................

Cleaning/Servicing.....................................................

General Safety Warnings............................................

Reciprocating Saw Safety Warnings.......................

CONTROLLER

(sold seperately)

RECIPROCATING SAW TOOLBOD

1. Live Tool Indicator

7. Shoe Plate Adjustment

2. Cord Guard

Lever

3. Lock Button

8. Shoe

4. Trigger

9. Blade *Not Included

5. Variable Speed Dial

10. Blade Holder

6. Controller Unlock Button

AC Recip Saw TRS-600-1 EU EN REV 07 .indd 1

WELCOME:

REMEMBER:

CONGRATULATIONS

Comply with all safety precautions and

instructions when using your BluCave products.

YOU'RE NOW A

•

BLUCAVER!

•

You're one of the growing community who have

•

embraced the BluCave work zone!

The BluCave Reciprocating Saw is one of the many

convenient AC ToolBods (power tool bodies) that

TIPS:

clicks into your BluCave AC Controller.

When cutting metal objects such as pipes, steel

rods, aluminum, brass, copper and sheet metal

always spread a thin film of oil over the cutting

surface.

Press the pivoting shoe firmly against the work

piece and do not allow the saw to bounce.

ASSEMBLY:

together until they click into place. (It's as easy as

Hook, Swing and Click) See Fig. 1.

DISASSEMBLING:

aution: All assembling, mounting, disassembling

Ensure the Reciprocating Saw is switched off before

and removing should be done with the saw turned off.

trying to remove the Controller. Press the unlock symbol

Remove the power cord from the power supply.

located on the Controller and then turn the ToolBod

TOOLBOD & CONTROLLER

away from the Controller.

aution: BluCave offer both AC (powered) and DC

FITTING SAW BLADES

(cordless) operated Controllers and ToolBods.

Ensure the blade is not damaged and always clean the

AC ToolBods will only operate with an AC Controller

shank thoroughly before fitting.

and DC ToolBods will only operate with a DC Controller.

For simple identification look for the appropriate

Ensure the saw is switched off and unplugged.

colour marking with green representing AC and orange

Rotate the blade holder anti-clockwise to unlock

representing DC.

and insert the blade with the sharp side facing the

underside of the ToolBod. See fig. 2. Ensure the small

ASSEMBLING:

Align the fixed hook (Grey)

of the Controller into the

corresponding recess on the

underside of the ToolBod.

Once located and engaged,

close the two faces of the

Controller and ToolBod

SWITCHING ON/OFF

the highest speed.

Low speed is ideal for delicate materials when minimum

Ensure the Controller and ToolBod are correctly

power and greater control is required.

connected and the saw blade is securely in place

Medium speed is suitable when a balance of power and

before operating. Plug the power cord into the power

control is needed.

supply (and switch it on if it's switchable). The blue

High speed produces fast cutting when accuracy is not

power indicator on the Controller will illuminate once

critical.

connected to the power supply.

Squeeze the trigger to start the Reciprocating Saw.

STORAGE:

Keep the trigger depressed to keep the saw operating.

Release the trigger to stop the saw.

To provide stable speed the power can be locked-on

ToolBods come with their own unique storage dock for

by pressing the lock button on the Controller when the

compact and protective housing inside the BluCave

trigger is completely depressed.

Carry Cabinets See Fig. 6

Squeeze the trigger fully to release the lock-on feature

then release the trigger to stop the saw.

SPEED

The Reciprocating Saw is a variable speed ToolBod.

As you squeeze the trigger on your Controller the

speed will vary from slowest to fastest at maximum

depression. The trigger also has a variable speed dial

which may be pre-selected before switching on.

Turn the dial to `A' for the lowest speed or up to `E' for

ENJOY:

Need some inspiration or support? The BluCave

website opens-up a whole new world of DIY.

You can ask for help, gain real time product

When in doubt always ask for advice.

information, share ideas and receive regular

Always wear protective clothing.

updates on special BluCave offers.

Always work in an uncluttered environment.

ACCESSORIES:

starter kit for each BluCave ToolBod.

VERSATILE CARRY CABINETS:

Cabinets provide storage options for the complete

BluCave range and even your existing tools.

They can be used as full sized portable cases or

mounted on the BluCave Rail as stylish cabinets.

BOOSTERS:

include power, light and audio.

Visit

Note: Always clean the blades before storing.

ADJUSTING THE SHOE

The pivoting shoe is designed to sit flush against the

work piece. It provides a guide for stability and can be

hole on the end of the blade

is aligned in the blade holder

so the holding pin will pass

through it when the blade

holder is released.

Slowly release the blade

holder and ensure the blade

is firmly held in place.

CLEANING/SERVICING:

Before cleaning the Reciprocating Saw remove the

power cord from the power supply.

The saw can be wiped over with a damp cloth but

must be completely dry before operating. Ensure the

ventilation slots are kept free from dust.

Have your power tool serviced by a qualified repair person

using only identical replacement parts. This will ensure

that the safety of the power tool is maintained.

Warning: Reciprocating Saw

storage dock will only fit in

the lowest slot of a Carry

Cabinet.

DID YOU KNOW...

The Reciprocating Saw can be used for cutting into

timber frame walls, plaster and copper pipes. (Always

ensure services are turned off and you know what is

inside the wall before cutting into it)

SYMBOL:

A set of accessories is available as a

The BluCave Carry

min

-1

dB(A)

m/s²

You can even 'boost' your BluCave to

BluCave.com

to view the complete work zone.

Always test under no load

set at a variety of distances to limit the depth of a cut.

to ensure the blade is fitted

It can also be positioned to limit the use of any parts of

correctly before use.

the blade that may have lost cutting efficiency. Pull the

shoe plate adjustment lever down to release the lock.

To remove the blade rotate

See fig. 3. Adjust shoe position. See fig. 4. Then return

the blade holder anti-

lever to locked position. See fig. 5.

clockwise until the holding

OPERATION:

pin releases it.

CAUTION: The blade may be

hot to touch after use.

Caution: Check that the voltage of your power supply

matches the specified voltage on the ToolBod and on

the Controller. If the voltages of either the Toolbod or

Controller do not match the power supply voltage do not

use the unmatched item/s.

Caution: Always ensure the cord guard is extended and

the tool is not used with it in the `storage' position. See

AC Controller instructions for details.

Note: Always wear a dust mask as harmful dust may be

generated while working.

WARRANTY:

This Batavia product comes with a 2 year warranty.

Dear Client, all Batavia products have undergone a strict

quality process. If for any reason this product is not

working or damaged, please contact our Client Service

Centre. Please retain your original receipt of purchase.

The Batavia warranty covers all defects in workmanship

or materials for a two year period from the date of

purchase. The Batavia warranty does not cover any

malfunction, or defect resulting from misuse, neglect,

alteration, or repair.

Deutschland | Kundenservice

Montag bis Freitag von 9 bis 17 Uhr

01805 937832*

Other European countries | Customer Services

Monday till Friday from 8 am until 4 pm

00800 66477400

Website: www.batavia.eu | Email: [email protected]

*Nur €0,14 /Minute aus dem dt. Festnetz,

max. €0,42/Minute aus den Mobilfunknetzen.

Watts

Volts

Amps

Hertz

Alternating Current

Kilograms

Millimetres

No load speed

Revolutions or reciprocations per minute

Decibels (A Weighted)

Vibration

Average vibration

Uncertainty

Double Insulated Construction

22/06/2004 1:53:27 AM