BluCube CXCL Series Manuel du propriétaire et manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire et manuel d'installation pour {nom_de_la_catégorie} BluCube CXCL Series. BluCube CXCL Series 13 pages. Circular, flush-mount, in-wall/in-ceiling loudspeakers

Imprimer la page
Features
Your BluCube® loudspeakers feature the following:
•
Woven Kevlar® Cones: Kevlar® has physical properties that make it ideal for loudspeaker drivers and consequently is found in many
of the world's finest loudspeakers. Its combination of stiffness and strength-to-weight ratio means that it results in a more precise and
defined sound reproduction
•Titanium tweeters: Another feature often found in the world's finest loudspeakers. The stiffness and lightness of a titanium dome
tweeter results in cleaner, brighter audio definition. (CXRL-650-LCR features a silk dome tweeter)
•Adjustable tweeters (N/A for CCL-650 model): The tweeters in your BluCube loudspeakers are mounted in an orbital socket and can be
adjusted by gently pressing on their edge. This adjustment allows for directing the sound when the speaker may need to be offset from an
ideal listening position due to aesthetic or physical reasons
•Stable tweeter housing: The tweeters in our circular flush-mount loudspeakers are mounted on a supremely stable bridge rather than on
a central pole as found in many current designs. This allows the speaker to handle more power with increased cone stability resulting in
lower harmonic distortion
•4/8 ohm impedance switching on the circuit board: The ability to switch between 4 ohms and 8 ohms impedance is useful to match the
speakers to your amplifier and is also useful if you wish to set up multiple pairs of speakers connected to a single amplifier. (Not on CXCL-
650-S or CXRL-650-LCR)
•Attenuation Switches: Your BluCube loudspeakers are fitted with high frequency (tweeter) and low frequency (woofer) attenuation
switches (and midrange on CXCL-650-S). These enable you to adjust the sound properties of the speaker to suit your personal listening
preferences and the acoustic properties of the room in which you are installing them. (Not on CXCL-650-S or CXRL-650-LCR)
•Cut-out template: BluCube loudspeakers come with a cut out template to allow the installer to accurately measure the hole to be cut out
in the wall or ceiling surface resulting in an easier installation process
•Paint Mask: BluCube loudspeakers come with a paint mask to allow the installer to protect the surface of the tweeter and the woofer
cone while (optionally) painting the surrounding speaker baffle (CXCL Range)
•Pre-construction bracket: All BluCube loudspeakers come with tough, plastic pre-construction brackets. Their use is optional, but can
be very helpful to the installation process at the time the plasterboard is about to be attached to the wall/ceiling. Therefore they would be
used only during more extensive renovations and not when fitting the loudspeakers into an existing surface
•Paintable Grilles: Your BluCube loudspeakers come with steel grilles pre-painted in white. These may be painted a different colour if
required. Important: Please refer to the section later in this manual on painting grilles before embarking on this
•Grille removal tool: Your (CXC) BluCube loudspeakers come with a pair of finger hooks to facilitate the removal of the grilles in the event
that you wish to adjust or remove your loudspeakers. CXCL and CXRL loudspeaker grilles are magnetically attached
•Installation Guide: This installation guide is included with your BluCube loudspeakers. From time to time we will publish updates to the
guide and so you may wish to refer to our web site for the most up to date version
Unit 12, Teddington Business Park
Station Road
TEDDINGTON, TW11 9BQ
Phone: 020 8977 8633