aion 3408 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} aion 3408. aion 3408 10 pages.

aion 3408 Manuel

TABLE OF CONTENTS

1 Project Overview
2 Introduction & Usage
INTRODUCTION
The Runoffgroove Supreaux Deux is an updated version of the Supreaux circuit, a JFET adaptation of
the Supro 16T amplifier. The original Supreaux circuit, originally designed in 2004, is well-known as the
source circuit for the JHS Superbolt and is also available as a PCB from Aion FX.
The Supreaux Deux was designed in 2008 in order to be more accurate to the sound of the Supro amp.
As the original circuit had grown in popularity, the Runoffgroove team decided that they could do better,
and the end result is something that they felt was even closer to the original amp's character.
The Aion FX version of the Supreaux Deux is a direct adaptation of the original circuit, but with two
modifications. First, since the original circuit needs 18V power to sound right, a charge pump has been
added to get 18V from a standard 9V input. In addition, another position has been added to the Bottom
switch allowing for three settings instead of two.
Since the J201 is very difficult to find in TO-92 through-hole format, and many DIY hobbyists are
intimidated by SMD parts, Aion FX offers
so they can be used as through-hole parts.
USAGE
The Supreaux has the following controls:
• Drive controls the volume going into the JFET clipping stage. At higher drive levels, the second JFET
will overload and clip the signal.
• Tone is a simple passive high-pass filter that can be dampened, retaining more treble as the knob is
turned up.
• Volume controls the overall output of the effect.
• Bottom is a toggle switch that reduces the amount of bass cut before the clipping stage.
RUNOFFGROOVE SUPREAUX DEUX
J201s in SMD format
that have been pre-soldered to adapters
2