DNF Controls 4000CL-O Manuel de l'utilisateur - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DNF Controls 4000CL-O. DNF Controls 4000CL-O 19 pages. 400 video clip fast access system with odetics protocol

Imprimer la page

15. FUNCTION TABLE

FUNCTION

KEY PRESS

GOTO

[SHIFT] + [RECUE]

ENTERED

TIME

GANG

[SHIFT]+[VTR #1]

[SHIFT]+[VTR #2]

[SHIFT]+[VTR #3]

[SHIFT]+[VTR #4]

FFWD

[FFWD]

JOG

[JOG]

LAST CUE

[LAST CUE]

LOOP

[SHIFT] + [PLAY]

NEXT CUE

[NEXT CUE]

RECORD

[REC]

REWIND

[RWD]

SHUTTLE

[SHUTTLE]

SLOMO

[SLOMO]

SLO-MO

[SHIFT] + [SLOMO]

SPEED

PRESET

STOP

[STOP]

TIME MODE

[TIME MODE]

SELECT

4000CL-O, 400 Clip Fast Access System, Odetics Protocol

DESCRIPTION

Search the VTR to the manually entered time.

Use the ST300 numeric keypad.

To manually enter the desired time press [ENTER] or [RECUE].

NOTE: G

RASS

ALLEY

ROUP

time search.

Individually press the VTR keys to be included in the gang; the LED

above the key will turn on. Press the VTR key again to remove from

gang; the LED above the key will turn off. Press [ESC] to exit.

The VTR LEDs that are on show the gang.

The flashing LED shows which VTR is currently selected.

Press and HOLD to FFWD. Release key to stop. Set WIND Speed in

MENU.

Select JOG mode and enable Wheel.

Step to the previous Cue Point Location.

Play the currently loaded clip in a continuous loop.

Step to the next Cue Point Location.

Places VTR into the Record mode selected by RECORD MODE in the

SETUP MENU. Press [RECORD] or [RECORD] + [PLAY].

Press and HOLD to REWIND. Release key to stop. Set WIND Speed

in MENU.

Select SHUTTLE mode and enable Wheel.

Press [SLOMO] to slo-mo the VTR. Turn the Wheel (or move the T-

Bar, if availale) to change the play speed.

Press [SLOMO] to STILL frame

OR press any transport key to exit SLOMO.

For WHEEL ONLY: Press [SHIFT] + [SLOMO] to preset the slo-mo

speed. Turn the Wheel to select desired speed.

Press [ESC] or any transport key to exit.

Press once to STILL frame VTR.

Press again to put VTR into STOP mode.

Press to toggle between Timecode (TC), VITC (VT) or Tape Timer

(TM) display modes.

Profile does not support TC or VITC