Blue Aura Blackline PG1 Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Blue Aura Blackline PG1. Blue Aura Blackline PG1 13 pages. Bluetooth turntable player

Imprimer la page

4. To disconnect pairing, power off the turntable or turn off Bluetooth pairing on your

Bluetooth speaker.

Note: This unit will connect to the closest Bluetooth speaker it. If after 2 minutes no

Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become

inactive and the LED will turn off.

Cartridge Replacement

. Before replacement, put the stylus protector back on the stylus to prevent

damage to the stylus during the replacement process.

2. Carefully remove the wire leads from the original cartridge.

3. Loosen the two screws on the headshell that are securing the cartridge and then

remove the original cartridge.

4. Mount the new cartridge to the headshell and tighten it lightly. Do not completely

tighten the screws at this moment.

5. Connect the wire leads to the new cartridge's terminals .The wire lead color

codes are as below:

White

Black

Red

Black

cartridge's position to make sure it is precisely aligned on the headshell so that the

stylus will be tracking the grooves in parallel perfectly.

To achieve this, place the included paper cartridge alignment protractor over the

turntable spindle, carefully lift the tone arm and place the tip of the stylus on the

points marked 130mm and 250mm respectively. Fine tune the cartridge's position

on the headshell until the cartridge is perfectly in parallel with the reference lines at

both points.

7. Tighten the screws completely once the perfect alignment is achieved.

Left channel positive (L+)

Left channel negative (L–)

Right channel positive (R+)

Right channel negative (R-)

Adju

the