Do-All Outdoors RAV1 Instructions de montage
Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Do-All Outdoors RAV1. Do-All Outdoors RAV1 2 pages. Auto trap
Également pour Do-All Outdoors RAV1 : Assemblage et fonctionnement (4 pages)
Imprimer la pageThe Raven Auto Trap
Assembly Instructions
A)
B)
A) Bolt Axle Onto Base.
B) Install Wheels On Axle.
Insert Washer, Wheel, And
Clamps Onto Axle.
A) Bolt On First Section On
Pull Handle Underneath
The Base.
B) Bolt On Handle Section
Of Pull Handle.
:
Carefully Remove Trap From Box.
A)
A)
• Make Sure Toggle Switch Is Set To Off
• Insert Safety Pin
• Load Clay Pigeons Into Stacking Poles
• Connect The Foot Pedal
• Before Connecting To Battery, Read All Safety Guidelines
• Conntect Electrical Clamps To 12V Deep Cycle Marine Bat
tery
• Turn Operating Switch To "On". The Trap Will Cock At This
Time. The Trap Is Now Live And Ready For Operation And
Extreme Caution Must Be Used
• Remove Safety Pin Before Firing
• Depress Foot Pedal To Throw Clay
• While Not In Use, Always "Release" The Trap By Flipping The
Release Switch. The Release Feature Will Fire The Arm And
A Live Bird If Loaded. The Arm Should Now Be In The Eight
O' c lock Relased Position. Never Let The Trap Sit Unattended
While Cocked.
• Insert Safety Pin And Remove Clamps From Battery
WARNING: PLEASE READ BEFORE USE
• If The Main Spring Is Attached, The Unit Is Considered
Armed And Extreme Caution Must Be Used.
• Stand Only Behind Unit. Not To Either Side.
• To "Release" The Unit For When The Unit Is Not In Use, Flip
The Release Button. The Release Switch Will Fire The Arm
And The Arm Will Then Set The Arm To The Eight O' c lock
"Released" Position.
• Always Have The Safety Pin Inserted When Not In Use. Fail-
ure To Insert Safety Pin Could Result In Bodily Injury.
• Before Unit Is Used, Install The Orange Safety Ring. The
Safety Ring Is A Visual Indicator Only For The Path Of The
Throwing Arm. Do Not Penetrate This Area When Unit Is
Armed.
B)
• Never Attempt To Work On Or Alter The Unit When Main
Spring Is Attached, Unit Is In The Cocked Position, Or Unit Is
Connected To Battery.
• Always Disconnect Unit From Battery When Not In Use.
• Never Place Any Part Of Body Near The Throwing Arm Or
Inside The Safety Ring When The Unit Is Cocked Or Con-
nected To The Battery.
• Never Let The Trap Sit Unattended While Cocked.
• Once The Knob For The Main Spring Bolt Is Installed, Never
Back It All The Way Off Of The Bolt. The Spring Is Under
Constant Pressure.
If Unit Is Not Operating Properly, Please Contact
1-866-SHOTDOC For Assistance
DO-ALL TRAPS, LLC DBA DO ALL OUTDOORS, LLC
DOES NOT ACCEPT ANY RESPONSIBILITY FOR DAM-
AGES AND/OR INJURY SUSTAINED FROM THE USE OR
MISUSE OF THIS PRODUCT.
B)
Customer Service:
1-866-SHOT-DOC
OPERATION:
SAFETY WARNINGS:
Email:
RAV1