dobar 50131 Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} dobar 50131. dobar 50131 8 pages. Large-capacity automatic pet feeder

Imprimer la page

Recording a Voice Message to be played at feeding times

Press and hold the REC key, the Red LED will turn on

Speak your message. You have up to 6 seconds

When finished, release the REC key

Playing back recorded Voice Message

Press the PLAY key

Your recorded message will now play

At each Feeding your recorded message will play and repeat 3 times

Feeding Alarm

Your PF-20 Automatic Pet Feeder has an ALARM (a continuous beeping) to

alert you to when your feeding schedule has ended and no more food will be

dispensed

The Feeding Alarm will start at 6:00AM the next day to avoid disturbing anyone

during the night

You can press any key to stop the alarm

To restart your original feeding schedule, press the START key

Manually feeding your pet

Press the SET and VOLUME keys together, once.

Only ¼ cup (60cc) will be dispensed. The normal schedule and quantity will not be

affected

Important Notes:

a) Power-on default settings are:

a)Number of Days to Feed=0 days (0=continuous),

b)Number of Feedings per Day=2 feedings and

c)Volume/Portion-size=1 (¼ Cup/60cc)

b) The feeder will vibrate for about 15 seconds during food delivery to

help the unit dispense food more efficiently

c) If you hear a few beeps (10 in total) and the feeder-drum isn't mo-

ving then the Tray-Full detector has been triggered.

MAKE SURE THE FOOD SLIDE AREA IS CLEAR OF FOOD.

d) Do not use the feeder under strong sun light as the Tray-Full

detector can be activated by bright light making the feeder act like the

food-tray is full and stop delivering food

Opening and Closing the food cover

To open ( Unlock ) the food cover of your PF-20 Automatic Pet Feeder, rota-

te the round dial so the ARROW points towards the Open Lock

To close ( Lock ) the food cover of your PF-10 Automatic Pet Feeder, rotate

the round dial so the ARROW points towards the Closed Lock

Care and Cleaning

When the food tank starts getting dirty and there is a lot of loose food at the bottom

of the food tank, you can remove the food cover and food tank for cleaning.

Use a soft damp cloth to clean the feeder base which contains the control panel and

batteries. Never get this part wet and do NOT wash with running water.

You can wash the Food Cover and Food Tank in warm soapy water.

DO NOT put these parts in the dishwasher or they will

be permanently damaged !!!

FAQ & Troubleshooting:

The clock can display in 12 or 24-hour format

The ( PM ) icon will show in the afternoon under the 12-hour display format

The feeding-days can be changed at any time but the previous schedule will be

replaced and the new schedule will start from the 1st new feeding day you set

The feeding-times and feeding-volume can be changed at any time and the new

settings will be for the rest of the feeding schedule

Once the schedule has started, the DAYS displayed will be reduced by 1 every

day at 0:00 (midnight) until the end is reached. It will then revert back to the

original number of set DAYS and the Feed Alarm will sound. Just press the

START key to start your original program/settings again

If the timer-icon is OFF and all numbers are flashing then no feeding schedule

has been set

When the timer icon is ON and all numbers on the LCD display are not flashing

then the schedule has started

When the Clock icon is ON the current time is displayed

When the Red (LOW BATT) light FLASHES, the batteries are low and must be

replaced

Change all the batteries as soon as possible. You will have to repro-

gram all your settings again when the batteries are changed

When the LCD display shows ( Err ), the food doors are not closing properly. You

need to clean and remove any food that jams the food doors.

1) Switch OFF the Auto Feeder, remove all food, turn your Auto Feeder upside

down

2) Clean both door hinges with a soft brush, like an old tooth brush

3) Manually open and close the doors, making sure they move smoothly. Make

sure both doors can hit the switch lever as shown in the photo below:

4) After cleaning switch ON the Auto Feeder and refill with food

Note: You will have to reprogram all your original settings

before you can use your feeder again

10. Always use the Quick Setup Guide for fast easy programming. If you want more

advanced features, use the comprehensive Instruction Manual