DOBE DB400 Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DOBE DB400. DOBE DB400 9 pages. Dog training bark collar

REMOTE CONTROL

LED Indicator Light

Toggle Switch

(Dog Channel: 1/2

Anti Bark Mode: A)

Vibration Button

The remote has 3 channels: 1and 2 is for the Remote Training Mode.

A is for the Anti Bark Mode. You will use the toggle switch on the

remote to switch between channels.

If you have one dog, you will need to pair to Channel 1 or Channel 2.

If you have two dogs and bought a second collar, you will need to pair

one collar to Channel 1 for one dog and you will need to pair the

second collar to Channel 2 for the second dog.

The three buttons on the remote for beep, vibrate, and shock can be

used for Channel 1, Channel 2, and Channel A.

Built-in Antenna

Shock/Vibration

Intensity Dial

Shock Button

Beep Button

Charging Port

The intensity dial on the remote is used to adjust the level

of vibrate or shock from 0 to 100 for Channel 1, Channel 2.

Turn the dial clockwise to turn the intensity up. 40 levels

is currently intensity in used.

Remote LED Indicator Light

It will stay on when the remote is charging.

It will turn off when the battery is fully charged.

It will flash if you press buttons on the remote.

It will blink every 3 seconds during standby mode until no operations

have been completed for 20 minutes.

Blink twice per second when the remote need to charging.

ANTI BARK COLLAR

ON/OFF/Pairing/Sensitivity Button

LED Indicator Light

How to turn the collar off and on

Click the button on the collar once to turn it ON. You will feel a short

vibrate to confirm it has been turned on.

To turn the collar OFF, quickly double click the button on the collar.

You will feel a long vibrate to confirm it has been turned off.

Contact Point

Charging Port