Dobinsons BU59-3656 Manuel d'installation - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dobinsons BU59-3656. Dobinsons BU59-3656 8 pages. Bullbar for toyota landcruiser 76,78,79 series v8
Imprimer la page
19. Once you are happy with the alignment
tighten the nuts and bolts on each side.
20. Once happy with the alignment of the bullbar
drill 2 x 8mm pinning holes on each side of the
bullbar drilling through both the mounting
bracket mounting plate and bullbar mounting
plate. Fix with 8mm bolts and nyloc nuts to
keep the bullbar in its position. This can be
easier done with a small drill from the inside
of the bar.
21. Plug the wires into the indicator, parker light
plug and fog lights. Test all lights and adjust
the position of the fog lights if required.
22. Fit the under bar protection kit now with the
bolts supplied. Check over all items removed
during installation.
23. Trim the wheel arch mud guard liners back so
they are not visible from the front of the
vehicle and secure.
24. IMPORTANT NOTES: It is important to inform
the customer that headlight adjustment may
also be required due to the change in ride
height. It is also important to inform the
customer that there will be a change in
vehicle handling characteristics. It is also
important to note that due to their nature fog
lights are required to provide a yellow light to
Dobinsons Springs and Suspension
allow clear fog vision. For this reason
Dobinsons bullbars utilise a Halogen bulb.
Halogen bulbs generate a considerable
amount of heat to achieve the yellow colour
and this causes the air inside the fog light lens
to expand and contract. For this reason the
fog light assembly cannot be sealed and has a
small breather on the back. In some cases this
may cause condensation to form inside the
fog light. The customer may choose to seal
the lens of the fog light but must not seal the
rear breather.
www.dobinsonsprings.com