Dobinsons BU59-3716 Manuel d'installation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Dobinsons BU59-3716. Dobinsons BU59-3716 12 pages. Bullbar for toyota landcruiser 200 series mid-2015 on
Imprimer la page
39. Plug the wires into the indicator, parker light
plug and fog lights. Test all lights and adjust
the position of the fog lights if required.
40. Check over all bolts to ensure they are tight.
41. Using the fastening hardware supplied fit the
under bar protection kit.
42. Trim the left hand and right hand mud guard
liners flush with the bottom of the under
protection plates and secure to the under
protection plates.
43. Check over all parts removed during
installation.
44. IMPORTANT NOTES: It is important to inform
the customer that headlight adjustment may
also be required due to the change in ride
height. It is also important to inform the
customer that there will be a change in
vehicle handling characteristics. It is also
important to note that due to their nature fog
lights are required to provide a yellow light to
allow clear fog vision. For this reason
Dobinsons bullbars utilise a Halogen bulb.
Dobinsons Springs and Suspension
Halogen bulbs generate a considerable
amount of heat to achieve the yellow colour
and this causes the air inside the fog light lens
to expand and contract. For this reason the
fog light assembly cannot be sealed and has a
small breather on the back. In some cases this
may cause condensation to form inside the
fog light. The customer may choose to seal
the lens of the fog light but must not seal the
rear breather.
www.dobinsonsprings.com