Flavor Burst CC8 Manuel de référence rapide - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Flavor Burst CC8. Flavor Burst CC8 15 pages.

Imprimer la page
CLR 2000 CC8 Cooling Hood Assembly - continued
MAINTENANCE OF THE COOLING HOOD ASSEMBLY
When the indicator on the dehumidifying canister turns
1A
pink, recharge the canister by placing it in an oven for 3
hours at 350 degrees Fahrenheit. The indicator will turn
a dark blue color when it is charged.
2
On occasion the Cooling Hood will need to be washed.
Unplug the hood from the power box. Use a single
service towel dampened with warm detergent water to
clean the Cooling Hood parts, taking care not to get
moisture near the electrical parts or fans. Rinse using a
dampened towel and dry thoroughly.
ELECTRICAL HAZARD: DO NOT RINSE OR
USE AN EXCESSIVE AMOUNT OF WATER OR
DETERGENT IN CLEANING THE HOOD.
FAILURE TO COMPLY MAY RESULT IN SERIOUS
ELECTRICAL SHOCK OR ELECTROCUTION.
© 2006 Flavor Burst Co. Flavor Burst is a registered trademark of the Flavor Burst Company. All other marks are property of their respective owners. All Rights Reserved.
REV040907
X
CLEAN
Detergent
RINSE
Water
Carefully remove the canister from the oven and place it
1B
in the canister box or a similar cardboard box. Place the
box within a plastic air-tight bag and place it in a
refrigerator or freezer until the canister cools to room
temperature or cooler.
NOTE: NEVER PLACE A WARM CANISTER IN
THE CC8 SYSTEM. IT IS RECOMMENDED AN
EXTRA CHARGED AND COOLED CANISTER
BE
KEPT ON
REPLACEMENT.
Turn off the Cooling Hood when external temperatures
3
fall below 67 degrees Fahrenheit to avoid the coolsink
from freezing up over time and stopping the internal
fan. If the coolsink does freeze up, turn off the Cooling
Hood, remove it from the machine and allow the ice
build-up to melt upside down. Remove the water from
the hood and dry thoroughly before installing it again.
DRY
15
HAND
FOR
EASY AND
QUICK
pg. 3 of 3