Aiper Seagull 600 Manuel de l'utilisateur - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aiper Seagull 600. Aiper Seagull 600 20 pages. Robotic pool cleaner
Imprimer la page
e. Clap on the clips
5.
Frequently Asked Questions (FAQ)
Q: Everything is normal during operation, but the robot gets stuck in the
drain pipe or drian cover
A: Please remove the flapper of the water inlet.
Q: The robot beeps but could not run after getting into water
A: 1. Check the status of the charging indicator.
2. Restart the machine after recharging.
3. If it still doesn't work, contact customer service to replace the driver
kit or machine.
Q: No response after turning on the robot
A:1. Plug in the charger and turn it on. If the robot beeps, continue to
charge it for 1 hour before getting it into the water (please charge it
after the cleaner is powered off and the beep stops). If it does not
work, it means the battery is abnormal and the driver kit needs to
be replaced;
2. If you can't turn on the machine even after plugging in the charger,
contact customer service to replace the driver kit or machine;
3. How to make sure the robot can be charged successfully?
Power on the robot and put it into the pool, see if it runs normally.
11