Aiper Smart Optimus HJ2052 Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aiper Smart Optimus HJ2052. Aiper Smart Optimus HJ2052 7 pages. Robotic pool floor cleaner
Imprimer la page
Power cord not
connected well
Damaged during
Robot does not work
Cleaner does not match
local rated voltage
Been blocked
Electric fault
Filter basket need to clean
Robot does not
climb wall
Rollers are worn or
consumed too much
1. Did not get the air out of the
The robot pool
machine.
cleaner does not go
2. The sponge brushes are not
totally soaked.
pool
3. The cleaner is not turned on."
1. Check if the LED on power
because it scheduled for 1 hour
and has completed cleaning. ( The
It just sits at the
and won't move
basket.
3. The belt is broken.
in this case contact with our
customer service for help.
It seems to spend
formed.
deep area without
area
Plug power cord and cable line
Contact local vendor
Contact local vendor
Check the impeller or driving system
Contact a local distributor
ter basket
Replace new roller
1. Hold the top handle make sure
then the cleaner can immerse
2. Soak the machine into the
water for about 1-2 hour and we
suggest manually knead the
sponge brushes to accelerate the
restart the machine.
3. Replace belts. (Tips: Please
don't use the cleaner immediately
surface to increase the clean
coverage.